Table of Contents
Advertisement
7 Parts and Controls
Lid
WARNING: Extreme caution must be maintained to prevent harm to the
user or the surrounding environment. Do not exceed a 120°C fluid temper-
ature for draining. The valve could be damaged if 120°C is exceeded.
Insulate the container from the floor or other objects that may be damaged
by high temperatures as required.
7.4
Lid
There are two different types of lids (see Figure 5 on page 25). The standard lid
has a stirring motor with an access hole and the optional fluid level adapter has
a cover and sight glass (see Figure 6 on page 26). Their features are described
with reference to figure numbers as follows:
2
3
1
Figure 5 Standard Lid - Top View
25
Advertisement
Table of Contents
