Advertisement
6. Open all clamps.
7. Prime the tubing using the pump's priming feature
according to the pump Instructions for Use. Ensure that
the entire fluid path is free of all air.
8. If the extension set contains a filter, prime
the filter according to the extension set's Instructions
for Use.
9. Close all tubing clamps.
Step 3- Start the Infusion
1. Using aseptic technique, connect the tubing to the
patient's access site.
2. Open all tubing clamps and begin the infusion.
WARNING: Ensure fluid path below filter is free of air
before connection to patient. Please refer to the detailed
Instructions for Use supplied with the medication cassette
reservoir for additional information, cautions, and warnings.
For pump priming, refer to the Operator's Manual supplied
with the pump.
Advertisement
