Accessories; Preparations - Takara Belmont RS III Operating Manual

□Neck cushion...１
□Wrench...１
■
Attach neck cushion on the basin
1
As shown in the illustrations, check the proper
direction of the neck cushion and fit it to the basin
along the basin edge.
Check the front and back.
When the cushion is mounted in
Caution
the wrong direction, it may contact
the backrest.
2
Secure the snap buttons of the neck cushion to the
fixing pins on the inner side of the basin.
The fixing pins are detachable. Be careful
not to lose them.
3
While shaping the neck cushion along the basin
edge, secure the snap buttons of the neck cushion to
the fixing pins on the outer side of the basin.
■
Remove neck cushion
1
Hold the snap buttons when removing the neck cushion.
Caution
Applying excessive force to remove the neck cushion may damage the parts.
The neck cushion is consumable supply. Replace it if it is extremely dirty or
Note
the surface has deteriorated. (available at additional cost)

Accessories

□Drain cap...１
□Hexagonal-head wrench...１

Preparations

□Hair catcher...１
□Installation instructions...１
□Operating Manual...１
□Setting sheet...１
□Shower Head Cleaning Instruction Manual...１
□Operation Instruction Manual for Trickle
Stopper Rubber ...１
Chair Side
Basin Side
Basin
11
□ Trickle stopper rubber...１
Chair Side
Neck Cushion
Fixing Pin
Snap Button
Snap Button