Table of Contents
Advertisement
5. Press [ ] or [ ] to locate language required.
6. Press [ ] to activate the selected language.
Alternatively, select a language at any time.
MENU / SETUP / LANGUAGE
3.7 COMPUTER INTERFACE
Your Half-Cell Meter is fitted with an RS232 interface. The interface is located under the interface access
cover at the rear of the Half-Cell Meter - see page 7.
This 5-pin RS232 interface is used with the data transfer cable to connect the Half-Cell Meter to the RS232
c
port
of a computer. When the Half-Cell Meter is connected to a computer you can:
•
Download personalised screens to the Half-Cell Meter (see "Personalised welcome screen" on
page 22).
3.8 USING THE EARPHONE
To use the earphone, plug the connector into the 3.5 mm socket marked
Meter. Replacement earphones are available as an optional accessory - see "Accessories" on page 25.
c.
An RS232 to USB transfer cable is available which allows you to connect your Half-Cell Meter to a USB port on your
computer. For ordering information, see "Accessories" on page 25.
on the front of the Half-Cell
R
15
Advertisement
Table of Contents
