R
BACKLIGHT
The display includes a backlight which illuminates the display for 10 seconds after any key is pressed and
during measurements. Switch the backlight on or off as required. Switching the backlight off will increase
battery life.
MENU / BACKLIGHT
3.6 SELECTING A LANGUAGE
Your Half-Cell Meter has a number of built-in languages. When the
Half-Cell Meter is switched on for the first time after dispatch from
the Elcometer factory the display will show the language selection
screen (Figure 3).
AT FIRST SWITCH ON
1. Press [ ] or [ ] to locate language required.
2. Press [ ] to activate the selected language.
The Half-Cell Meter operates in the new language until changed.
AT ANY TIME
1. Switch the Half-Cell Meter off.
2. Press and hold left hand softkey.
3. Press [
] to switch on Half-Cell Meter.
The display will show the language selection screen with the current language highlighted by the
cursor.
4. Release left hand softkey.
14
Figure 3. Language selection
screen