One battery pack is supplied with the Half-Cell Meter. To increase productivity on site, Elcometer
recommends that you purchase a spare battery pack which can be charged while you are using your Half-
Cell Meter. To order an additional battery pack (see "Accessories" on page 25), contact Elcometer or your
local Elcometer supplier.
CHARGING THE BATTERIES
The rechargeable battery must be fully charged before using the Half-Cell Meter for the first time. Use only
the charger supplied with your Half-Cell Meter to charge the battery. Use of any other type of charger is a
potential hazard, may damage your Half-Cell Meter and will invalidate the warranty. Do not attempt to
charge any other batteries with the supplied charger.
Always charge the battery indoors. To prevent overheating, ensure that the charger is not covered.
1. Unscrew
retaining screw (1)
and
open
interface
access
cover (2) on the rear
of
the
Half-Cell
Meter.
the
the
3
3
R
1
2
7