Admissible Forces At Controller - VAT 612 Series Installation, Operating, & Maintenance Instructions

2.4.1 Admissible forces at controller

Attention!
Do not pushing, shocking load, or stressing the valve controller!
Do not deposit anything at valve controller!
The admissible force at valve controller in regards to the pedestal is shown in table below. In case higher force is
applied, the pedestal could be permanently damaged!
Admissible force «F»
400 N
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
Installation, Operating & Maintenance Instructions
Series 612 DN 50 (I.D. 2"), RS485
a = middle of aluminium part of controller (b / 2), c = pedestal
Overview
F = Force
F
a
c b
F
a
c b
290089EA
2011-06-21
a
a
11/65