Master Ignition Switch (If Fitted) - Triumph Speed Triple 1200 RR 2021 Owner's Handbook Manual

GENERAL INFORMATION
26
Passive Key Operation
To turn the motorcycle on with the
passive key (or the smart key if the
battery is discharged):
▼ Hold the key on the system sensor
located on the right hand side of the
motorcycle.
▼ The key needs to be held within
+/-10 mm of the system sensor. Take
care not to damage the motorcycle
paint work.
1. Right hand rear panel
2. System sensor
3. Rider's seat
4. Passive key shown
▼ The smart key must be held against
the system sensor while pressing the
Engine Start/Stop switch in either
the QUICK START or Power ON/OFF
position (see page 64).
1 2 3
+ 10 mm
- 10 mm
4
Master Ignition Switch (if
fitted)
Master Ignition Switch
The master ignition switch is only fitted
to motorcycles in the United States and
Canada. The master ignition switch is
located on the right hand side of the
motorcycle.
To operate the motorcycle with the
keyless ignition, the master ignition
switch must be in the ON position.
If the master ignition switch is in the
OFF position then the keyless ignition
cannot be used and the motorcycle can
not be started.