Table of Contents
Advertisement
MAINTENANCE
170
The
headlight
directly under the headlight unit.
1
1. Headlight bracket
2. Headlight bracket alignment marks
3. Fixings
To vertically adjust the headlight:
▼ Switch the ignition on. The engine
does not need to be running.
▼ Switch the headlight dipped beam on.
▼ Loosen the two fixings securing the
headlight bracket to the intake duct
sufficiently
movement of the headlight.
▼ Using the marks on the headlight
bracket, adjust the position of the
headlight to give the required beam
setting. Each mark on the headlight
bracket represents 1°. Moving the
headlight bracket forwards will move
the headlight upwards. Moving the
headlight
move the headlight downwards.
▼ Tighten the headlight bracket fixings
to 4 Nm.
▼ Recheck the headlight beam settings.
▼ Switch the headlights off when the
beam settings are satisfactorily set.
adjuster
is
2
3
to
allow
restricted
bracket
rearwards
located
Headlight Adjustment
Speed Triple 1200 RS Only
The headlight unit can only be adjusted
vertically. The vertical beams of the left
hand and right hand headlights can
only be adjusted together. Independent
adjustment
adjusting the headlight, check and
correct the tyre pressures.
B01282
1. Fixings
2. Front subframe alignment marks
3. Front subframe
To vertically adjust the headlight:
▼ Switch the ignition on. The engine
does not need to be running.
▼ Switch the headlight dipped beam on.
▼ Loosen the two fixings securing the
headlight
subframe
restricted
will
headlight.
▼ Moving the bracket forwards will
move the headlight upwards. Moving
the bracket rearwards will move the
headlight downwards.
▼ Tighten the headlight bracket fixings
to 6 Nm.
▼ Recheck the headlight beam settings.
▼ Switch the headlights off when the
beam settings are satisfactorily set.
is
not
possible.
3
1
2
bracket
to
the
sufficiently
to
movement
of
Before
front
allow
the
Advertisement
Table of Contents
