Tyre Wear; Minimum Recommended Tread Depth; Tyre Replacement - Triumph Bonneville Bobber Owner's Handbook Manual

Hide thumbs Also See for Bonneville Bobber:
Table of Contents

Advertisement

Maintenance

Tyre Wear

As the tyre tread wears down, the tyre
becomes more susceptible to punctures
and failure. It is estimated that 90%
of all tyre problems occur during the
last 10% of tread life (90% worn). It is
recommended that tyres are changed
before they are worn to their minimum
tread depth.
Minimum Recommended Tread
Depth
Warning
Riding with excessively worn tyres is
hazardous and will adversely affect
traction, stability and handling which
may lead to loss of control and an
accident.
When tubeless tyres, used without a
tube, become punctured, leakage is
often very slow. Always inspect tyres
very closely for punctures. Check the
tyres for cuts, embedded nails or other
sharp objects. Riding with punctured
or damaged tyres will adversely affect
motorcycle
stability
which may lead to loss of control or an
accident.
Check
the
rims
deformation. Riding with damaged or
defective wheels or tyres is dangerous
and may lead to loss of control and an
accident.
Always
consult
Triumph dealer for tyre replacement,
or for a safety inspection of the tyres.
106
and
handling
for
dents
or
your
authorised
In
accordance
maintenance chart, measure the depth
of the tread with a depth gauge, and
replace any tyre that has worn to, or
beyond the minimum allowable tread
depth specified in the table below:
Under 80 mph
(130 km/h)
Over 80 mph
(130 km/h)

Tyre Replacement

All Triumph motorcycles are carefully
and extensively tested in a range of
riding conditions to make sure that
the most effective tyre combinations
are approved for use on each model.
It is essential that approved tyres
and inner tubes (if installed) fitted in
approved combinations, are used when
purchasing replacement items. The use
of non-approved tyres and inner tubes,
or approved tyres and inner tubes in
non-approved combinations, may lead
to motorcycle instability, loss of control
and an accident.
A list of approved tyres and inner tubes
specific to your motorcycle are available
from your authorised Triumph dealer, or
on the Internet at www. triumph. co. uk.
Always have tyres and inner tubes
fitted and balanced by your authorised
Triumph dealer who has the necessary
training and skills to ensure safe,
effective fitment.
with
the
periodic
2 mm (0.08 in)
Front 2 mm
(0.08 in)
Rear 3 mm (0.12 in)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bonneville speedmaster

Table of Contents