Packing An Ex4600 Switch Or Component For Shipping; Packing An Ex4600 Switch For Shipping - Juniper EX4600 Series Hardware Manual

EX4600 Switch Hardware Guide
Related
Documentation

Packing an EX4600 Switch or Component for Shipping

Packing an EX4600 Switch for Shipping

206
Returning an EX4600 Switch or Component for Repair or Replacement on page 203
If you are returning an EX4600 switch or component to Juniper Networks for repair or
replacement, pack the item as described in this topic.
Before you pack an EX4600 switch or component:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage. See "Prevention of Electrostatic Discharge Damage" on page
Retrieve the original shipping carton and packing materials. Contact your JTAC
representative if you do not have these materials, to learn about approved packing
materials. See "Contacting Customer Support to Obtain Return Materials Authorization
for EX Series Switches" on page
Ensure that you have the following parts and tools available:
ESD grounding strap.
Antistatic bag, one for each component.
If you are returning the chassis, an appropriate screwdriver for the mounting screws
used on your rack or cabinet.
This topic describes:
Packing an EX4600 Switch for Shipping on page 206
Packing EX4600 Switch Components for Shipping on page 207
To pack an EX4600 switch for shipping:
Power down the switch and remove the power cables. See
1.
Switch" on page 163.
Remove the cables that connect the EX4600 switch to all external devices.
2.
Remove all field-replaceable units (FRUs) from the switch.
3.
Have one person support the weight of the switch while another person unscrews
4.
and removes the mounting screws.
Remove the switch from the rack or cabinet (see
5.
EX4600 Switch" on page
Place the switch in the shipping carton.
6.
Place the packing foam on top of and around the switch.
7.
If you are returning accessories or FRUs with the switch, pack them as instructed in
8.
"Packing EX4600 Switch Components for Shipping" on page
207.
"Chassis Lifting Guidelines for an
105) and place the switch in an antistatic bag.
Copyright © 2014, Juniper Networks, Inc.
120.
"Powering Off an EX4600
207.