Table of Contents
Advertisement
38 / 60
11.3
Preparing storage
Before storing motors, the protective covers
attached to the motor at the time of delivery must
be fitted.
12
Environmental protec-
tion and disposal
Disposal of the motor components can be done
according to the applicable legal process in
normal recycling process.
Recycling
Most of the products can be recycled due to
their high content of metal. In order to recycle
the metal in the best possible way, the prod-
ucts must be disassembled into individual assem-
blies. Metals contained in electric and electronic
assemblies can also be recycled by means of
special separation processes.
Basic components
Basically, our motors consist of the following
components:
•
Steel, stainless steel, aluminum, copper,
brass
•
Plastic parts, insulation and composite mate-
rial
•
Electronic components
•
Permanent magnets
Plastic parts of the products may contain flame
retardants. These plastic parts are labeled
according to EN ISO 1043-1:2011 + A1:2016.
They have to be recycled separately or disposed
of according to the applicable legal provisions.
Bosch Rexroth AG
MKE Synchronous Servomotors
Magnets
WARNING
Danger due to permanent magnets!
−
Health hazard for persons with heart pace-
makers, metallic implants and hearing aids
in direct environment of permanent mag-
nets.
−
Crushing hazard of fingers and hand due to
heavy attractive forces of the magnets.
−
Risk of destruction of sensitive parts like
watches, credit cards, ...
Remark: The permanent magnets of the rotor
or secondary part must be demagnetized before
disposal to avoid injuries or damage.
The demagnetization is reached via special
thermal treatment. The handling duration is influ-
enced by the rotor frame size. The rotor or the
secondary part has to remain in the oven for a
minimum of 30 minutes, starting at the time,
the magnetic surface has reached 300 °C. If the
magnets are surrounded by a bandage or a cover
plate, it is recommended to remove it before
heating in the oven to expose the magnets.
If demagnetization is successful, the magnets can
be separated from the rotor or secondary part
after cooling without applying force.
Packaging
Our packaging materials do not contain any prob-
lematic materials and can therefor be easily dis-
posed. Packaging materials are: wood, cardboard
and polystyrene.
Batteries and accumulators
The symbol indicating "separate collection" for
all batteries and accumulators is the crossed-out
wheeled bin. End users in the EU are legally
bound to return used batteries and accumula-
R911414374, Edition 01
Advertisement
Table of Contents
