Fault Messages - Miele PRI 210 Operating Instructions Manual

Notes

Fault messages

When a fault occurs, ironing is interrupted, the  button flashes, and a four-digit code ap-
pears in the display. Pressing the flashing  button acknowledges the fault (the fault is
stored in the fault memory). The  button flashes and the ironing process can be
restarted.
Fault code Fault
 
 
 
  Heater fault
 
 
 
 
 
 
 
Electronic fault
 
 
 
 
 
Drive fault
 
 
Fan fault
  Electronic fault
  Appliance blocked
 
Drive voltage too low
 
General compressor fault
  Low voltage
 – Control system fault
If the fault message appears again, repeat the process or switch the iron off before switch-
ing it back on again. If the fault persists, contact Miele Technical Service.
In the event of a malfunction, contact Miele Technical Service.
28