Using The Cleaning Cloth - Miele PRI 210 Operating Instructions Manual

Cleaning and care

Using the cleaning cloth

Use the cleaning cloth for cleaning the heater plate.

Since the cleaning cloth is smaller than the heater plate, you cannot clean the entire
heater plate width by feeding the cloth through once. You need to feed the cloth through
the iron several times, and move it from side to side.
Tip: You can loosen incrustations such as starch residue by feeding a cloth soaked in luke-
warm water through the iron first.
a
Pocket
b
Cleaning strip
Lay the cleaning cloth on the left side of the infeed table with the cleaning strip facing the

heater plate.
Feed the cleaning cloth evenly and straight from the left side of the infeed table through

the iron until it comes all the way out on the other side.
The cleaning strip loosens the soiling. The softer cotton strip removes the soiling and pol-
ishes the heater plate.
Feeding the cleaning cloth through the Rotary Iron from the left to the right side
Now lay the cleaning cloth back on the infeed table, but this time move it slightly to the

right. The cleaning strip must again face the heater plate.
Feed the cleaning cloth through the iron again.

Repeat the process until you reach the right side of the infeed table and the entire width

of the heater plate has been cleaned.
Press the  button to end the cleaning program.

30
1 .
2 .
3 .
①
②
③
c
Cotton strip