Fault Messages - Miele PM 1210 Operating Instructions Manual

Notes
22

Fault messages

When a fault occurs, ironing is interrupted, the  button flashes, and
a four-digit code appears in the display. Pressing the flashing  but-
ton acknowledges the fault (the fault is stored in the fault memory).
The  button flashes and the ironing process can be restarted.
If the fault message appears again, repeat the process or switch the
iron off before switching it back on again. If the fault persists, contact
Miele Technical Service.
Fault message Fault
F 0
F 1
F 2
F 8 Heating fault
F 20
F 24
F 25
F 39
F 40
F 41
F 42
Electronic module fault
F 43
F 45
F 47
F 49
F 50
Drive fault
F 53
F 57 Fan fault
F 61 12 V (24V) voltage missing
F 99 Machine locked
F 104 Drive voltage too low
F 108 General compressor fault
F 120 Low voltage
F 4500-4512 Control system fault
In the event of a malfunction, contact Miele Technical Service.