Miele PM 1217 Quick Start Manual

,Please read the instruction manual before installing and using this machine and observe all warning and safety instructions.
A
Preparing for use
Switch the ironer on by pressing the On /Off - button
^
The "Finger guard" symbol will flash in the display.
^ Now activate the finger guard by lifting it.
D Selecting the iron speed
^ Select the roller speed.
Symbol Speed range
?
Low speed range
? ?
Medium speed range
? ? ?
Medium speed range
G
Ironing with a coin-operated payment system
Switch the ironer on by pressing the "On /Off" - button.
^
The K display symbol flashes.
^
^ Insert the coin or token.
The K symbol will go out in the display.
^
^
Select the corresponding temperature range according to the type of laundry.
^
Select the roller speed.
B
Ironing
The button Start begins to flash as soon as the ironer
has reached the minimum temperature.
^
Now press the flashing Start button to start up the ironer.
E Laundry feed
^ Lay the item parallel to the roller at the
beginning of the laundry infeed table.
^
Smooth the item.
^
Feed the item into the machine.
After the 3 indicator light goes out, the rotary iron is ready for
ironing and the countdown of the purchased ironing time begins.
^
Press the Start button to start the ironer.
C Select a temperature
^ Set the corresponding heater plate temperature accor-
ding to the type of fabric.
Type of fabric Symbol Temperature
ß
Nylon / artificial silk 100 - 110 °C (212 - 230 °F)
ßß
Wool, silk 111 - 150 °C (231 - 202 °F)
ßßß
Cottons / linen 151 - 185 °C (303 - 365 °F)
F FlexControl footswitch
^ While ironing, press the FlexControl footswitch with
your foot to switch the iron to steaming mode and
steam the laundry.
Continuing the ironing procedure
^ Remove your foot from the footswitch again to
continue with the ironing procedure.
At the end of the ironing time, the trough lowers and the
roller comes to a standstill. The K display symbol flashes.
More ironing time can be purchased at any time.
en - CA
M.-Nr. 10109960 /01