Display Messages - Miele B 3312 Operating Instructions Manual

Problem solving guide

Display messages

Message
 Drain valve closing

Drain valve fault
Switch off/on

Memory fault
Switch off/on

Unplug at mains
72
Possible cause and remedy
When the steam ironing system was switched on, the
steam generator drain was open. The drain is closed
automatically during this message.
The descaling or rinsing process has not been carried
out properly.
 Press the  button to switch the steam ironing
system off and then back on again.
 If the fault message continues to be displayed,
contact Miele.
There is a fault with the steam ironing system.
 Press the  button to switch the steam ironing
system off and then back on again.
The steam ironing system must now be reset.
 Complete the steps required when using for the
first time (see "Before using for the first time").
 If the fault message continues to be displayed,
contact Miele.
Electronic fault.
 Switch off at the wall socket and withdraw the
plug.
 Wait a while and then insert the plug back in the
socket and switch on.
 Press the  button to switch the steam ironing
system back on again.
The steam ironing system will try and rectify the fault
itself.
 If the fault message continues to be displayed,
switch off at the wall socket and withdraw the
plug. Contact Miele.