Miele PM 1210 Quick Manual

PM 1210, 1214, 1217

Please read the instruction manual before installing and using
this machine and observe all warning and safety instructions.
 Before you begin
 Turn on the iron with the "On / Off" button .
The "Finger guard" symbol will fl ash.
 Now activate the finger guard by lifting it.
 Selecting the iron speed
 Select the roller speed.
Symbol Speed range
Low speed range
fi
Medium speed range
fi fi
High speed range
fi fi fi
US
 Ironing
The Start button begins to fl ash as soon as the
minimum temperature is reached.
 Now press the flashing "Start" button to start up
the ironer.
 Laundry feed
 Lay the item parallel to the roller at the be-
ginning of the laundry infeed table.
 Smooth the item.
 Feed the item into the machine.
Ironing with a coin-operated payment system
 Turn on the iron using the "On / Off" button .
The  display symbol fl ashes.
 Insert the coin or token.
The  symbol will go out in the display.
 Select the corresponding temperature range
according to the type of laundry.
 Select the roller speed.
 Select the temperature
 Set the corresponding heater plate temperature
according to the type of fabric.
Type of fabric Symbol Temperature
212 - 230 °F
Nylon / Polyester / 
Other synthetics
(100 - 110 °C)
231 - 302 °F
Silk / Wool
 
(111 - 150 °C)
Cottons / Linens 304 - 362 °F
  
(151 - 185 °C)
 FlexControl footswitch
 While ironing, press the FlexControl footswit-
ch with your foot to switch the iron to steaming
mode and steam the laundry.
Continuing the ironing procedure
 Remove your foot from the footswitch again to
continue with the ironing procedure.
After the  indicator light goes out, the rotary
iron is ready for ironing and the countdown of
the purchased ironing time begins.
 Press the Start button to begin ironing.
At the end of the ironing time, the heater plate
lowers and the roller comes to a standstill. The
 symbol fl ashes. More ironing time can be
purchased at any time.
en - US
M.-Nr. 101 09 940 /01