Maximum Permissible Total Duct Length; Optional Accessories; Mounting The Base (Optional) - Miele PRI 210 Operating Instructions Manual

Notes for installer
Maximum permis-
sible total duct
length
Mounting the
base (optional)
26
Adequate room ventilation must be ensured during operation.
Minimum inside duct diam-
eter (sheet metal ducting)
2 ¾" (70 mm)
3 ⅛" (80 mm)
3 ½" (90 mm)
4" (100 mm)
 Once the machine has been successfully installed and con-
nected, replace all the external parts that were removed.

Optional accessories

Mounting the optionally available base can raise the machine by
4" (100 mm).
Dismantle the mounting flaps on the left and right sides.

Unscrew the screw-on feet by the maximum amount

( > 2 ⅜" (60 mm)).
Hold the side columns with a suitable aid and remove the screw-on

feet.
Mount the screw-on feet into the base and push the base under the

column.
Screw the base to the base plate of the machine.

Maximum permissible total duct
length
Exhaust air
PRI 214
PRI 217
16' 4 ⅞" (5 m)
65' 7 ⅜" (20 m)
104' 11 ⅞" (32 m)
131' 2 ¾" (40 m)