Miele PRI 210 Operating Instructions Manual page 32

Cleaning and care
Fold up the waxing cloth.

Start the waxing program (see "Starting the waxing program" in "Waxing the heater

plate").
Feed the waxing cloth into the rotary iron with the rubber-coated side facing the roller.

Feed the waxing cloth into the rotary iron multiple times from the left or right side at the

necessary intervals across the entire working width of the iron. If no damp patches can
be seen on the waxing cloth after it has passed through the rotary iron, add additional
ironing wax.
On rotary irons with feed-in belts, ensure that no ironing wax comes into contact with
the belts.
Otherwise, the belts become too smooth and can no longer be driven properly.
Press and hold the  button for at least 3 seconds once waxing is complete.

Waxing mode is deactivated.
- After waxing, feed a cotton cloth through the rotary iron to remove wax residues.
- To maintain the smooth surface of the heater plate, it should be waxed after every work-
ing day.
Always carry out cleaning in the cleaning program and waxing in the waxing program,
otherwise the rotary iron's maintenance interval will not be reset. The maintenance interval
is only reset once cleaning and waxing have been carried out in the corresponding mode
for at least 40 seconds.
32
1 .
2 .
3 .