Software Version; Legal Information; Showroom Programme; Factory Default - Miele H 7640 BM Operating And Installation Instructions

Microwave combination oven
Hide thumbs Also See for H 7640 BM:
Table of Contents

Advertisement

Running a RemoteUpdate
Information about the content and
scope of an update will be provided in
the Miele app.
A message will appear in your oven dis-
play if a software update is available.
You can install the update immediately
or postpone this until later. When the
oven is switched on again, you will be
reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the oven off during the
update. Otherwise, the update will be
aborted and will not be installed.
- Some software updates can only be
carried out by the Miele Customer
Service Department.

Software version

The software version is intended for the
Miele Customer Service Department.
You do not need this information for do-
mestic use.
 Confirm with OK.

Legal information

You can find an overview of the integ-
rated Open Source components under
Open source licences
 Confirm with OK.
.

Showroom programme

This function enables the oven to be
demonstrated in showrooms without
heating up. This setting is not needed
for domestic use.
Demo mode
If you have demo mode activated,
Demo mode switched on. The appliance
will appear when you
will not heat up
switch the oven on.
-
On
Touch OK for at least 4 seconds to ac-
tivate demo mode.
-
Off
Touch OK for at least 4 seconds to de-
activate demo mode. You can use the
oven as normal.

Factory default

-
Appliance settings
Any settings that have been altered
will be reset to the factory default set-
tings.
-
User programmes
All User programmes will be deleted.
-
MyMiele
All MyMiele entries will be deleted.
-
Recomm. power levels
Microwave power levels which have
been changed will be reset to the fact-
ory default settings.
-
Recommended temps.
Any recommended temperatures that
have been changed will be reset to the
factory default settings.
Settings
45

Advertisement

Table of Contents
loading

Table of Contents