Functions And Settings; Operation; Basic; Richarge - ProLights TRUSSPOD3BAT User Manual

Truss warmer with triangular shape
Table of Contents

Advertisement

Available languages

Available languages

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). Switch on the TRUSSPOD3BAT with
the power switch. The unit is ready for operation and can be operated via a DMX controller or it independ-
ently performs its show program in succession.
After operation, switch off the unit with the power switch.

3.2 BASIC

The TRUSSPOD3BAT has a LED display and 4 buttons for access to the functions of the control panel (Fig.3).
MENU
Used to access the menu or
to return a previous menu
option

3.3 RICHARGE

To recharge TRUSSPOD3BAT, plug the power cable into a mains socket (100-240V ~/ 50-60Hz). The unit will
turn on the red LED to indicate that the process is in place to recharge the battery.
A complete charging Green LED will light to indicate the end of the process.
NOTE - The charging time are 5 h and autonomy is 7 h.
TRUSSpOD3BAT
MENU UP DOWN ENTER
UP
Button to select the values
in ascending order of the
function
DOWN
Button to select the values
in descending order of the
function
ENTER
Used to select and store the
current menu or confirm the
current function value or
option within a menu
Fig.3 - Functions of the buttons
7

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Tribe trusspod3bat

Table of Contents