Operating Elements And Connections - ProLights TRUSSPOD3BAT User Manual

1.3 OPERATING ELEMENTS AND CONNECTIONS

Side 1 - 2 - 3
1. POWER STATUS
RED: charging the battery
GREEN: battery charge
2. CONTROL PANEL with display and 4 button
used to access the control panel functions
and manage them.
3. MICROPHONE to control the show by the
external audio signal.
4. POWER IN mains plug for connection to a
socket (100-240V 50/60Hz) via the supplied
mains cable. The support for the mains fuse
is located near the mains plug. Only replace a
TRUSSpOD3BAT
1
MIC
3
MENU UP DOWN ENTER
POWER IN
4
6
7
DMX IN
ON
8
OFF
9
2
POWER OUT
5
DMX OUT
10
blown fuse by one of the same type (T1A 250V).
5. POWER OUT: connect to supply power to the
next unit.
6. SAFETY EYE to attach safety cable
7. GND POINT grounding the fixture to the earth
8. ON/OFF button
9. DMX IN (3-pole XLR):
1 = ground, 2 = DMX -, 3 = DMX +
10. DMX OUT (3-pole XLR):
1= ground, 2 = DMX -, 3 = DMX +
5
Fig.1