Receiving - YASKAWA A1000 Installation Manual

Motor pg feedback line driver interface

Hide thumbs Also See for A1000:

3 Receiving

Receiving

Please perform the following tasks upon receipt of the option:

• Inspect the option for damage.

Contact the shipper immediately if the option appears damaged.

• Verify receipt of the correct model by checking the model number printed on the name

plate of the option. (Refer to

• Contact your supplier if you have received the wrong model or the option does not

function properly.

◆

Option Package Contents

Description:

–

Quantity:

◆

Tools Required for Installation

• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the

option.

• A straight-edge screwdriver (blade depth: 0.6 mm (1/32"), width: 3.5 mm (1/8")) is

required to wire the option terminal block.

• A pair of diagonal cutting pliers.

• A small file or medium-grit sandpaper.

Note: Tools required to prepare option cables for wiring are not listed in this manual.

Figure 1

Option

Ground Wires

PG-X3

YASKAWA ELECTRIC TOBP C730600 37B 1000-Series Option PG-X3 Installation Manual

on page

for more information)

Screws (M3)

Installation Manual

MANUAL

Table of Contents

L1000a