3
Receiving
Please perform the following tasks after receiving the DeviceNet Option:
• Inspect the DeviceNet Option for damage.
If the DeviceNet Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the PCB (see
Figure
2).
• If you have received the wrong model or the DeviceNet Option does not function
properly, contact your supplier.
◆
Contents and Packaging
Description:
_
Quantity:
◆
Tool Requirements
A Phillips screwdriver (M3) metric or (#1, #2) U.S. standard size is required to install the
DeviceNet Option.
A straight-edge screwdriver (M2) is required to wire the terminal block.
YASKAWA ELECTRIC TOBP C730600 43A YASKAWA AC Drive-Option Card DeviceNet Installation Manual
Table 1 Contents of Package
Ground
Option Card
1
Screws
Cable
1
3
3 Receiving
Installation
LED Label
NS
MS
1
Manual
MANUAL
1
9