Receiving - YASKAWA SI-P3/V Technical Manual

3 Receiving

3 Receiving
Please perform the following tasks after receiving the PROFIBUS-DP Option:
• Inspect the PROFIBUS-DP Option for damage.
If the PROFIBUS-DP Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate (see
• If you receive the wrong model or the PROFIBUS-DP Option does not function properly, contact your supplier.
Contents and Packaging
Description:
_
Quantity:
Tool Requirements
A Phillips screwdriver (M3, M3.5 to M6
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
Note: Tools required to prepare PROFIBUS cables for wiring are not listed in this manual.
8
Table 2 Contents of Package
Option Unit
1
) metric or (#1, #2
<1>
Ground Cables
4
) U.S. standard size is required to install the PROFIBUS-DP Option.
<1>
YASKAWA ELECTRIC SIEP C730600 23B V1000 Option PROFIBUS-DP Technical Manual
Figure 2).
Warning Labels Installation Manual
1
MANUAL
1