Device Management; Device Information - Tripp Lite B64-032-04-IPG Owner's Manual

OSD Operation

Device Management

The Device Management section allows Super Administrators, and Administrators/Users who have been given permission, to configure and control
the KVM switch. When the Device Management icon is selected, it opens with the Device Information page displayed.
Note: If you do not have permission to configure the KVM switch, the Device Management icon will not appear when you log onto the KVM.

Device Information

The Device Information page displays general information about the
settings of the KVM switch, and allows you to configure settings
related to the KVM's dual power supplies and temperature sensors.
The following table describes the contents of the Device Information page.
Note: B064-008-01-IPG and B064-016-01-IPG KVMs Only – Power Supply Detection, Power Supply 1 and Power Supply 2 are the only
Environment Information fields that are displayed.
Item Description
Device Name The port name assigned to the KVM switch is displayed here.
MAC1 Address The B064- Series KVM switch contains two network interfaces. The MAC address of the first network interface is
displayed here. The KVM MAC addresses are also displayed on the bottom panel of the KVM switch.
MAC2 Address The B064- Series KVM switch contains two network interfaces. The MAC address of the second network interface is
displayed here. The KVM MAC addresses are also displayed on the bottom panel of the KVM switch.
Firmware Version The firmware version of the KVM switch is displayed here.
Main FPGA The Main Field-Programmable-Gate-Array (FPGA) is displayed here.
Console FPGA The Console Field-Programmable-Gate-Array (FPGA) is displayed here. Note: Does not apply to the B064-008-01-IPG
& B064-016-01-IPG KVMs.
Video Driver The Video Driver version is displayed here.
IP Address1 The IPv4 IP address of the first network interface is displayed here.
Subnet Mask 1 The IPv4 Subnet Mask of the first network interface is displayed here.
Gateway 1 The IPv4 Gateway of the first network interface is displayed here.
Preferred DNS Server 1 The IPv4 Preferred DNS Server of the first network interface is displayed here.
Alternate DNS Server 1 The IPv4 Alternate DNS Server of the second network interface is displayed here. Note: Applicable to the B064-008-01-IPG
and B064-016-01-IPG KVMs only.
IPv6 Address 1 The IPv6 IP address of the first network interface is displayed here.
IPv6 Subnet Prefix The IPv6 Subnet Prefix Length of the first network interface is displayed here.
Length 1
Power Supply Detection The B064- IPG KVM features dual power supplies. Checking this checkbox will cause the KVM to beep when receiving
power from one source, and a message will appear on the local console screen asking you to confirm that you are
aware of the situation.
Power Supply 1 The icon to the right of this is gray when power supply 1 is not receiving power. It is blue when power supply 1 is
receiving power.
Power Supply 2 The icon to the right of this is gray when power supply 2 is not receiving power. It is blue when power supply 2 is
receiving power.
(continued)
36