Download - Tripp Lite B64-032-04-IPG Owner's Manual

OSD Operation
Maintenance
(continued)
System Operation
The System Operation sub-section allows you to clear port names, and
reset the KVM configuration settings to their default values.
The functions available in the System Operation page are explained in
the table below.
Field Example
Clear Port Names Click this button to clear all of the port names on the installation and restore them to their default values. Upon clicking this
button, you will be prompted to confirm that you wish to clear all port names. Click Yes to proceed.
Reset Default Values Click this button to undo all configuration changes that have been made to the KVM, and restore them to the factory default
settings. This does not affect port names, account information or network information. Upon clicking this button, you will be
prompted to confirm that you wish to proceed. Click Yes to proceed.
Reset on Exit Check this box and click the Apply button to have the KVM switch reset itself and implement all new settings upon logging out.
(Following the reset, allow approximately 30 to 60 seconds before logging back into the KVM.)
If you change the IP address of the KVM, the Reset on Exit checkbox is automatically checked. To prevent the KVM from
resetting and saving the new IP address, uncheck this box. Note: Un-selecting this checkbox will only cause the new network
settings to be ignored for one logout. When you log back in, the changes you made still appear in the Network settings fields,
and the Reset on Exit checkbox is once again checked. To ensure that these settings don't get changed to something you
don't want, always make sure that you leave the Network settings page with the correct information entered in.

Download

The Download icon is used to download non-browser AP versions of
the Windows and Java Clients, as well as the Log Server. Selecting
this tab will open a drop-down list of the programs that are available
for download.
Note: If you have not been given access to one of these applications,
you will not be able to download it.
Click on the Download icon and select the program you want to
download. Save it to a convenient location on your hard disk and run
it from there.
(continued)
59