Configure - Tripp Lite B64-032-04-IPG Owner's Manual

The Log Server

Configure

The Configure menu consists of three functions: Add, Edit and Delete.
Add
Select the Add function when you need to add a new B064-Series
KVM Switch to the list of units that the Log Server records events for.
Note: You must first add a B064-Series KVM Switch via the Add
function before the Log Server can start recording its events.
Descriptions of the fields in this dialog box are shown in the table below:
Field Description
Address This can either be the IP address of the B064-Series KVM Switch or its DNS name (if the network administrator has
assigned it a DNS name). This value must be entered into the ANMS tab of the OSD Device Management Notebook to
communicate with the Log Server. (See Advanced Network Management Settings section for details.)
Port Key in the port number that was specified in the ANMS tab of the OSD Device Management Notebook. If the port
number differs between the B064-Series KVM Switch OSD and the Log Server, the two will not be able to communicate
with each other.
Description This field is provided so that you can enter in additional information that will help differentiate this B064-Series KVM
Switch from the rest of the devices the Log Server is recording information for.
Limit This specifies the number of days that an event is kept in the Log Server's database before it can be deleted. To remove
all events that have passed the expiration date set in this field, use the Maintenance function in the Events menu.
Edit
Select the Edit function to modify the information pertaining to an existing B064-Series KVM Switch. To edit an existing B064-Series KVM
Switch, select it from the list and open the Edit function from the Configure drop-down menu. A dialog box will appear showing the exact
information that was entered for the B064-Series KVM Switch when it was added using the Add function. Edit this information and click OK.
Delete
To delete a B064-Series KVM Switch, simply select it from the list and open the Delete function. A dialog box will appear which will display the
B064-Series KVM Switch information and ask you to click OK to delete it. If you want to remove it from the Log Server, click OK.
(continued)
When you open the Add function the following dialog box will
appear:
75