Tripp Lite B64-032-04-IPG Owner's Manual page 46

OSD Operation
Advanced Network Management Settings
DIT Creation
The LDAP Data Interchange Format (LDIF) is used to represent
LDAP entries in a simple text format (please refer to RFC 2849).
The figure below illustrates an LDIF file that creates the DIT for the
B064-Series KVM Switch directory tree (shown in the figure in the
previous section).
The following figure illustrates an LDIF file that defines the
OpenLDAP group for the B064-Series KVM Switch.
SNMP Agent
(continued)
(continued)
Using the New Schema
To use the new schema, do the following:
1. Save the new schema file (e.g., B064-Series KVM switch.schema)
in the /OpenLDAP/ schema/ directory.
2. Add the new schema to the slapd.conf file, as shown in the figure:
3. Restart the LDAP server.
4. Write the LDIF file and create the database entries in init.ldif with
the ldapadd command, as shown in the following example:
ldapadd -f init.ldif -x -D "cn=Manager,dc=tripplite,dc=com" -w
secret
To set SNMP Agent, do the following:
1. Check Enable.
2. Click Add. A window appears.
3. Select the Version.
4. Key in the Community Name.
5. Key in NMS IP/Host Name.
6. Select the Access Type and click Save.
46