Tripp Lite B64-032-04-IPG Owner's Manual page 54

OSD Operation
Blade Server Configuration
2. Fill in the fields according to the information provided in the following table.
Field Description
Server Model Select your blade server model from this drop down list.
Include KVM This item is for information purposes and can't be edited. If the server supports a KVM function, this box is checked.
Otherwise, it is unchecked.
Server Name Enter in a name for the blade server here.
Server IP Enter in the IP address (IPv4, IPv6, or domain name) used to access the blade server via a serial connection
(Telnet or SSH).
Service Port Enter the port number used for serial access.
User Name Enter in the username required for serial access authentication.
Password Enter in the password required for serial access authentication.
Scan Interval Enter in the interval that determines how frequently the KVM switch scans the blade server for information.
Timeout Enter in the amount of time that the KVM switch will wait for a response from the blade server before it stops scanning.
Web URL Enter in the IP address (IPv4, IPv6, or domain name) used to access the blade server via web browser.
Login Name Enter in the username required for browser authentication.
Login Password Enter in the password required for browser authentication.
3. When you have finished configuring the fields, click Next to bring up the dialog box with the Step 2 tab displayed.
4. The Step 2 dialog presents a summary of the blade server's configuration, including the number of blades installed. Click Save to add the blade
server to the installation.
Modifying / Deleting a Blade Server
• To modify a blade server's configuration, first select it in the Sidebar tree, and then click Modify. Make your changes on the Setup Blade Server
dialog box.
• To remove a blade server, first select it in the Sidebar tree, and then click Delete.
Web Access
To access the blade server's Web page, first select it in the Sidebar tree, and then click Access Web.
(continued)
(continued)
54