Tripp Lite B64-032-04-IPG Owner's Manual page 61

Remote Session Operation
Control Panel
(continued)
Hotkeys
Various configuration actions related to the keyboard, video and
mouse can be performed via hotkey combinations. The Hotkey setup
utility is accessed by clicking on the Hotkey / Macros icon and then
clicking on the Hotkeys button at the top of the screen. The Hotkeys
screen displays the available hotkeys and their corresponding hotkey
combinations.
By default, the only hotkeys that are enabled are the Exit Remote
Location and Substitute Alt Key hotkeys. To enable/disable a hotkey,
simply check/uncheck the box to the left of it. To change a hotkey's
command sequence, follow the steps below.
1. Highlight the desired hotkey and click on the Set Hotkey button.
2. Key in the desired hotkey combination, one key at a time. The keys
will be displayed in the hotkey column as they are entered. Note:
Clicking the Cancel button will cancel the recording process.
Clicking on the Clear button will delete any keys that you entered
while keeping the recording process active.
3. When finished entering the hotkey sequence, click on the Save
button.
Note: Clicking the Reset button will restore all of the default hotkey
command sequences, and enable/disable defaults. You can use the
same function keys for more than one hotkey command sequence, as
long as the first key is not the same. For example, you can use [F1,
F2, F3] for one action and [F2, F1, F3] for another, but you cannot
use [F1, F3, F2] once [F1, F2, F3] has been used.
The table below lists the default hotkeys, along with a description of their functions and their default command sequences.
Hotkey Description
Exit Remote
Closes you out of a remote session.
Location
Adjust Video Opens the Video Settings screen.
Toggle Control
Toggles the Control Panel off and on. When off, you will not be able to access the control panel.
Panel
Toggles the local mouse pointer between an arrow and a tiny circle. Note: This Hotkey appears when
Toggle Mouse
Display accessing the WIN Client only.
When the local and remote mouse pointers go out of sync, this command brings them back together
Adjust Mouse
again.
Video Auto-Sync Performs a video auto-sync.
Show/Hide Local
Toggles the local mouse pointer on/off.
Cursor
By default, hotkey combinations that use the Ctrl key, such as [Ctrl, Alt, Delete], get sent to the
Substitute Ctrl Key local computer. This hotkey allows you to set a substitute Ctrl key that can be used for the remote
computer.
By default, hotkey combinations that use the Alt key, such as [Ctrl, Alt, Delete], get sent to the
Substitute Alt Key local computer. This hotkey allows you to set a substitute Alt key that can be used for the remote
computer.
(continued)
61
Command Sequence
[F2, F3, F4]
[F5, F6, F7]
[F3, F4, F5]
[F7, F8, F9]
[F8, F7, F6]
[F6, F7, F8]
[F4, F5]
F11
F12