Valor 1000KP Homeowner's Manual page 15

Cleaning your fireplace
Refi t the window
1. Place the window in its bottom railing. Make sure
to remove any vermiculite or glass particles in the
railing before installing the window.
Bottom
railing
2. Push the top of the window frame against the
fi rebox.
3. While you hold it, pull and hook the side levers
back to the window brackets on each side.
4. Apply fi rm hand pressure around the window
frame to make sure the window is sealed tight
against the fi rebox.
WARNING
The window unit must be correctly
installed, fastened and sealed after
servicing or serious bodily injury and/or
Window
damage to the fi replace may result.
Frame
To ensure a safe operation:
• Double-check that the bottom of the
window frame is correctly installed in
the bottom support railing;
• Verify that the levers are hooked
properly to the window tabs then;
• Pull out the top of the window and
release it to ensure the springs return it;
• Ensure the window is sealed before
operation.
WARNING
Failure to install the window correctly
can:
• Cause carbon monoxide to leak.
• Affect the performance of the fireplace.
• Damage components.
• Cause overheating resulting in
dangerous conditions.
Damage caused by incorrect window
installation is not covered by the Valor
Warranty.
15