Flexible Flat Cable, Flexible Board And Coaxial Cable; Connecting/Disconnecting Flexible Flat Cable And Flexible Board - Sony HXR-NX80 Service Manual

1-5.

Flexible Flat Cable, Flexible Board and Coaxial Cable

1-5-1.

Connecting/Disconnecting Flexible Flat Cable and Flexible Board

Note
• Be very careful not to fold flexible flat cable and flexible board. Life of flexible flat cable and flexible board will
be significantly shortened if they are folded.
• Each flexible flat cable and flexible board has conductor side and insulated side. If the flexible flat cable and flexible
board are connected in the wrong orientation of the conductor side and the insulated side, the circuit will not
function.
• Insert the flexible flat cable and flexible board straight.
• Check that the conductive surface of the flexible flat cable and flexible board are not contaminated.
Type A to B
Type A
Contact
surface
A
A
Disconnecting
1. Turn off the power.
2. Slide or lift up the portion A in the direction of the arrow to unlock and pull out the flexible flat cable and flexible
board.
Connecting
1. Insert the flexible flat cable and flexible board firmly as far as them will go with the insulating surface facing
upward.
2. Close the latch of the connector in the direction of arrow B to lock the flexible flat cable and flexible board.
HXR-NX80/HXR-MC88
Type B
A
Isolation
surface
1-9