Sony HXR-NX80 Service Manual page 72

2. Peel off the tape AS (2040), and then remove the screw.
Upper side
Tape AS (2040)
(Cut size: 12 x 12mm)
Tapping screw
(P1.7 x 5)
Note
When attaching the tape AS (2040), observe the following instructions.
• Attach the tape AS (2040) to the position shown in the figure.
• When using the new tape AS (2040), cut it to the designated size.
3. Remove the five screws (precision screw (P1.7 x 4)) and six screws (tapping screw (P1.7 x 5) ).
Upper side
HXR-NX80/HXR-MC88
Precision screw
(P1.7 x 4)
Tapping screws
(P1.7 x 5)
How to fold the flexible board
Position of tape AS (2040)
Tape AS (2040)
Tapping screw
(P1.7 x 5)
Precision screws
(P1.7 x 4)
Precision screw
(P1.7 x 4)
Upper side
Tapping screws
(P1.7 x 5)
3-46