Sony HXR-NX80 Service Manual page 88

10. Peel off the adhesive at the left end of the guide shaft as shown in the figure.
Guide shaft
Adhesive portion
11. Remove the guide shaft.
(1) Push the guide shaft in the direction of the arrow until it comes off the bearing.
(2) Lift the P frame moving assembly as shown in the figure.
(3) Push the guide shaft in the direction of the arrow until it comes off the bearing.
(3)
Bearing Guide shaft
HXR-NX80/HXR-MC88
(2)
P frame moving assembly
(1)
Guide shaft Bearing
3-62