3-15-2.
1 Group Lens Assembly
Preparation
1.
Remove the cabinet (G) assembly. (Refer to
2.
Remove the heat sink (GP) assembly. (Refer to
3.
Remove the GR-1003 board. (Refer to
4.
Remove the top cabinet assembly. (Refer to
5.
Remove the EF-1003 board. (Refer to
6.
Remove the IR-1009 board. (Refer to
7.
Remove the inner mold (T) assembly. (Refer to
8.
Remove the cabinet (R) assembly. (Refer to
9.
Remove the BT panel assembly. (Refer to
10. Remove the ZM-1005 board. (Refer to
11. Remove the VF assembly. (Refer to
12. Remove the MS-1037 board. (Refer to
13. Remove the VC-1045 board. (Refer to
14. Remove the lens assembly. (Refer to
Procedure
1.
Decrease the adhesive strength of the adhesion paper with ethanol, and remove the front ornament (1730).
Adhesive papers
HXR-NX80/HXR-MC88
"3-2. Cabinet (G)
Assembly".)
"3-3. Heat Sink (GP)
"3-4. GR-1003
Board".)
"3-5. Top Cabinet
Assembly".)
"3-6. EF-1003
Board".)
"3-7. IR-1009
Board".)
"3-8. Inner Mold (T)
"3-9-1. Cabinet (R)
"3-10-1. BT Panel
Assembly".)
"3-11. ZM-1005
Board".)
"3-12. VF
Assembly".)
"3-13. MS-1037
Board".)
"3-14. VC-1045
Board".)
"3-15-1. Lens
Assembly".)
Front ornament (1730)
Assembly".)
Assembly".)
Assembly".)
3-49