Sony HXR-NX80 Service Manual page 29

2. Remove the cabinet (G) assembly.
(1) Release the belt.
(2) Open the HDMI lid, and then remove the two screws.
(3) Open the USB lid, and then remove the five screws.
(4) Release the four hooks, and then draw the cabinet (G) assembly.
Note
Be careful not to break the flexible flat cable.
(5) Disconnect the flexible flat cable from the connector (CN0901) on the LA-1003 board.
HDMI lid
Precision screws
(P1.7 x 4)
LA-1003 board
Cabinet (G) assembly
3. Install the removed parts by reversing the steps of removal.
HXR-NX80/HXR-MC88
Flexible flat cable
CN0901
Hooks
Precision screws
(P1.7 x 4)
Belt
Hooks
USB lid
3-3