3-8.
Inner Mold (T) Assembly
Preparation
1.
Remove the cabinet (G) assembly. (Refer to
2.
Remove the heat sink (GP) assembly. (Refer to
3.
Remove the top cabinet assembly. (Refer to
4.
Remove the EF-1003 board. (Refer to
5.
Remove the IR cabinet assembly. (Refer to
Procedure
1.
Disconnect the flexible board from the connector (CN4003) on the VC-1045 board.
CN4003
(VC-1045 board)
Note
When connecting the flexible board, push the flexible board as shown in the figure.
HXR-NX80/HXR-MC88
"3-2. Cabinet (G)
Assembly".)
"3-3. Heat Sink (GP)
"3-5. Top Cabinet
Assembly".)
"3-6. EF-1003
Board".)
"3-7. IR-1009
Board".)
Flexible board
Assembly".)
Arrangement of flexible board
3-13