Sony HXR-NX80 Service Manual page 41

5. Disconnect the flexible board.
(1) Peel off the tape AS (2040).
(2) Disconnect the flexible board from the connector (CN4603) on the GR-1003.
Flexible board
GR-1003 board
CN4603
Note
When connecting the flexible board, observe the following instructions.
• Check that the flexible board passes under the inner mold (T).
• Attach the tape AS (2040) to the position shown in the figure.
• When using the new tape AS (2040), cut it to the designated size.
HXR-NX80/HXR-MC88
Tape AS (2040)
(Cut size: 12 x 12mm)
Position of tape AS (2040)
Tape AS (2040)
Inner mold (T)
3-15