Related Manuals for ICP DAS USA LP-8 4 Series
Summary of Contents for ICP DAS USA LP-8 4 Series
- Page 1 ICP DAS (v1.6) The OS image parameters are specified as follows:...
-
Page 2: Required Software Versions
ICP DAS 1.【Required Software Versions】 Before updating OS image, check the shipment date for your device. This is important as there are two versions of the OS image update depending on the shipment date: If the shipment date is earlier than 2013/03/25, you will only need to download the latest version of the OS image file and the... - Page 3 ICP DAS 2.【Preparation】 (1) Preparation tools as below： Power Supply: +10 to +30V (E.g., DP-665) https://www.icpdas.com/en/product/guide+Accessories+Power__Supplies+Power__Supply for a full list of the available accessories. USB card reader for microSD card × 1 (Fig. 1) microSD card × 1 (Fig. 2) Fig.1 USB card reader Fig.2 microSD card <...
- Page 4 ICP DAS (2) Insert the microSD card into the USB microSD card reader, and then make a copy of the directories indicated below, including all the subdirectories, for backup purposes. The directories that should be copied depend on your shipment date: ...
- Page 5 ICP DAS (4) Move the rotary switch to position , as shown in Fig. 5. Fig.5 Move the rotary switch to position 2 By the way, user can try ‘wget’ command to download files served with ftp over a network in LP-8x4x. Command: wget ftp://ftp.icpdas.com/pub/cd/linpac/napdos/lp-8x4x/SD_Card/boot/2/lp8x4x_1.16_m.bin Command:...
-
Page 6: Update Procedure
ICP DAS 3.【Update Procedure】 < Important Notes > 1. Ensure that you perform a backup of any important files, before attempting to update the OS image. 2. DO NOT power off or reboot the controller while the OS image is being updated, as this may result in the OS image becoming corrupted, which may cause the controller to malfunction. - Page 7 ICP DAS (3) Being uploading the OS Image to the Flash memory on the LP-8x4x, as show in Fig. 9. Fig. 9 Uploading the OS Image to the Flash memory (4) After the upload process is complete, the LP-8x4x will automatically reboot to finalize the update process, as show in Fig.