Right Handlebar - Suzuki AN650Z Manual

SHIFT MODE CHANGE SWITCH
" 0
D M
"
Push the shift mode change switch to
change from DRIVE mode to MAN-
UAL mode and vice versa.
DRIVE mode:
The drive mode indicator in the instru-
ment panel shows D. The transmis-
sion shifts automatically.
MANUAL mode:
The gear position indicator shows a
numeral. The transmission can be
changed by pushing the shift switch
4.

RIGHT HANDLEBAR

SCREEN
ENGINE STOP SWITCH 1
"" position
The ignition circuit is off. The engine
cannot start or run.
"" position
The ignition circuit is on and the
engine can run.
HAZARD WARNING SWITCH ""
2
All four turn signal lights and indica-
tors will flash simultaneously when
the switch is turned on with the igni-
tion switch in the "ON" or "P" position.
Use the hazard warning lights to warn
other traffic during emergency park-
ing or when your vehicle could other-
wise become a traffic hazard.
FRONT BRAKE LEVER 3
The brake is applied by squeezing the
front brake lever gently towards the
grip. The brake light will be lit when
the lever is squeezed inward.
2-24