Right Handlebar - Suzuki VL800 Manual

RIGHT HANDLEBAR

Engine Stop Switch 1
"" position
The ignition circuit is off. The
engine cannot start or run.
"" position
The ignition circuit is on and the
engine can run.
NOTICE
Changing the engine stop

switch from
  
to to
damage to the engine or the
catalytic converter (if equipped).
Do not use the engine stop
switch except for an emer-
gency.
Front Brake Lever 2
Apply the front brake by squeez-
ing the front brake lever toward
the grip. The brake light will come
on when the lever is squeezed.

to or from
while riding may
Front Brake Lever Adjustment
The distance between the throttle
grip and the front brake lever is
adjustable to 5 positions. To
change the position, push the
brake lever forward and turn the
adjuster to the desired position.
Be sure the adjuster stops in the
proper position; a projection of the
brake lever holder should fit into
the depression of the adjuster.
This motorcycle is delivered from
the factory with its adjuster set on
position 3.
 WARNING
Adjusting the front brake lever
position while riding can be
hazardous. Removing a hand
from the
reduce your ability to control
the motorcycle.
Never adjust the front brake
lever position while riding.
Keep both hands on the han-
dlebars.
3-16
handlebars can