Light Bulb Replacement - Suzuki AN650Z Manual

LIGHT BULB REPLACEMENT

The wattage rating of each bulb is
shown on the chart below. When
replacing a burned out bulb, always
use the exact same wattage rating.
Using other than the specified rating
can result in overloading the electrical
system or premature failure of a bulb.
NOTICE
Failure to use a light bulb with the
correct wattage rating can over-
load the electrical system of your
motorcycle or cause the bulb to
burn out sooner.
Use only the light bulbs shown in
the chart as replacement bulbs.
Headlight
Front turn signal light
Rear turn signal light
Brake light/Taillight
License plate light
12V 60/55W (H4) × 2
12V 21W × 2
12V 21W × 2
12V 21/5W × 2
12V 5W
HEADLIGHT BULB REPLACEMENT
To replace the headlight bulb, follow
the procedure below:
1. Remove the right and left fasten-
ers.
2. Unhook the hooks and remove the
rear handle cover 1.
3. Remove the front handle cover 2.
6-36