Suzuki AN650Z Manual page 28

Table of Contents

Advertisement

OIL CHANGE INDICATOR E
The oil change indicator comes on to
remind you to change the engine oil.
The indicator comes on at initial 1000
km (600 miles) and preset intervals
thereafter. The preset interval is
adjustable between 500 km (300
miles) and 6000 km (3600 miles) in
500 km (300 mile) steps. Reset the
indicator after changing the engine oil
to turn off the indicator.
To reset the oil change indicator:
1. Turn off the ignition switch.
2. Press and hold the SELECT but-
ton G and turn the ignition switch
to the "ON" position and hold the
SELECT button G for 3 seconds.
3. The oil change counter will reset
and the OIL CHANGE indicator E
blinks 3 times and goes off.
To preset the oil change interval:
1. Set the meter to odometer, then
press and hold the ADJUST but-
ton H for 2 seconds until the
INTERVAL F and OIL CHANGE
E indicators blink.
2. Push the SELECT button G to
decrease the interval from 6000
km (3600 miles) to 500 km (300
miles) in 500 km (300 mile) steps.
3. Push the ADJUST button H to
increase the interval from 500 km
(300 miles) to 6000 km (3600
miles) in 500 km (300 mile) steps.
4. Press and hold the SELECT G
and the ADJUST H buttons for 2
seconds.
NOTE:
The
preset
adjusted after odometer reaches
1000 km (600 miles).
Reset the indicator after initial
engine oil replacement.
Reset
the
replacement even if the indicator
is not displayed.
Preset interval change does not
reset the indicator.
2-17
interval
can
indicator
after
be
oil

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

An650

Table of Contents