Suzuki AN650Z Manual page 93

FINAL GEAR OIL REPLACEMENT
1. Place the motorcycle on level
ground on the center stand. Hold
the motorcycle
check the final gear oil.
2. Remove the bolts and final gear
case cover 1.
3. Place an oil pan below the final
gear case.
4. Remove the oil drain plug 2 and
oil level plug 3.
5. Tighten the oil drain plug 2 and
pour fresh oil through the oil level
hole until the oil level reaches the
oil level hole.
6. Tighten the oil level plug 3.
vertically and
6-28
 WARNING
Operating the motorcycle with too
little final gear oil can cause the
final drive unit to lock up and
cause an accident.
Check for leaks and the correct
level of final gear oil before each
use. Add oil if necessary. Tighten
the drain plug securely after
changing the gear oil.
 WARNING
Children and pets may be harmed
by swallowing new or used oil.
Repeated, prolonged contact with
used engine oil may cause skin
cancer. Brief contact with oil may
irritate skin.
Keep new and used oil away from
children and pets. To minimize
your exposure to used oil, wear a
long-sleeve shirt and moisture-
proof gloves (such as dishwash-
ing gloves) when changing oil. If
oil contacts your skin, wash thor-
oughly with soap and water. Laun-
der any clothing or rags if wet with
oil. Recycle or properly dispose of
used oil.
NOTE: Recycle or properly dispose of
used oil.