Suzuki AN650Z Manual page 25

ABS INDICATOR LIGHT "" 0
This indicator normally comes on
when the ignition switch is turned
"ON" and goes off after the motorcy-
cle speed exceeds 5 km/h (3 mph).
If there is a problem with the ABS
(Anti-lock Brake System), this indica-
tor light blinks or comes on. The ABS
does not operate when the ABS indi-
cator light is on or blinking.
NOTE:
• If the ABS indicator light goes off
before starting the motorcycle,
check the ABS indicator light func-
tion by turning off and on the igni-
tion switch. The ABS indicator
light can go off if the engine is
revved at high speed before start-
ing the motorcycle. If the ABS
indicator light does not come on
when the ignition switch is turned
on, you should have the system
checked by an authorized Suzuki
dealer as soon as possible.
• When the motorcycle is placed on
the center stand with the engine
running after riding the motorcycle
and racing the engine, the ABS
indicator light can come on. In
such a case, check if the ABS
indicator light comes on by turning
off and on the ignition switch. After
that, check if the ABS indicator
light goes out after the motorcycle
speed exceeds 5 km/h (3 mph). If
the ABS indicator light does not
go out, you should have the sys-
tem checked by an authorized
Suzuki dealer as soon as possi-
ble.
 WARNING
Riding the motorcycle with the
ABS indicator light on can be haz-
ardous.
If the ABS indicator light blinks or
comes on while riding, stop the
motorcycle in a safe place and
turn off the ignition switch. Turn
the ignition switch "ON" after a
while and check if the indicator
light comes on.
• If the indicator light goes off
after starting to ride, the ABS
will be functioning.
• If it does not go off after starting
to ride, ABS is not functioning,
and the brakes provide normal
stopping ability. You should
have the system checked by an
authorized Suzuki dealer as
soon as possible.
2-14