Using Art-Net Function - Panasonic PT-RCQ10 Operating Instructions Manual

Class Command
Input terminal name
2 INNM ?
query
Input signal resolution
2 IRES ?
query
Recommended
2 RRES ?
resolution query
FREZ Freeze control
2
FREZ ? Freeze status query
Cooling notification
2 POWR
Warmup notification
2 ERST Error notification
2 LKUP Link up notification
Input switch
2 INPT
completion notification
2 SRCH Projector search
PJLink security authentication
The password used for PJLink is the same as that of the password set for web control.
When using the projector without security authentication, do not set a password for web control.
f For specifications related to PJLink, visit the website of Japan Business Machine and Information System
Industries Association.
URL http://pjlink.jbmia.or.jp/english/

Using Art-Net function

Since the network function of the projector supports the Art-Net function, you can control the projector settings
with the DMX controller and application software using the Art-Net protocol.
Channel definition
The following table lists the channel definitions used for controlling the projector with the Art-Net function.
Channel settings can be switched using the [NETWORK] menu → [Art-Net CHANNEL SETTING] (x page 180).
The control details assigned to each channel are listed in the following table.
f Channel assignment for [USER] is in factory default setting. Assignment can be changed.
Channel
CHANNEL1
CHANNEL2
CHANNEL3
CHANNEL4
Chapter 7 Appendix — Technical information
Parameter/response
Control details
string
31 / DVI-D
32 / HDMI
33 / DIGITAL LINK
34 / SDI
35 / SLOT-1
36 / SLOT-2
37 / SLOT-3
38 / SLOT-4
AAAAxBBBB
1920 x 1200
0
1
0
1
xxxxxx
xx:xx:xx:xx:xx:xx
31
32
33
34
35
36
37
38
ACKN=xx:xx:xx:xx:xx:xx
[2]
LIGHT OUTPUT
INPUT SELECT
LENS POSITION
LENS H SHIFT
Remark
Returns input terminal name.
SLOT-1 (name of the input 1 of the Interface Board installed in
the slot)
SLOT-2 (name of the input 2 of the Interface Board installed in
the slot)
SLOT-3 (name of the input 3 of the Interface Board installed in
the slot)
SLOT-4 (name of the input 4 of the Interface Board installed in
the slot)
AAAA: Horizontal resolution
BBBB: Vertical resolution
Returns display resolution.
Freeze clear
Freeze (stop)
Notifies when the power is turned off.
Notifies when the power is turned on.
Notifies when an error occurs.
Notifies the MAC address when the PJLink communication
becomes possible.
DVI-D
HDMI
DIGITAL LINK
SDI
SLOT-1 (input 1 of the Interface Board installed in the slot)
SLOT-2 (input 2 of the Interface Board installed in the slot)
SLOT-3 (input 3 of the Interface Board installed in the slot)
SLOT-4 (input 4 of the Interface Board installed in the slot)
The projector connected to the same network that can
communicate with PJLink will respond with its MAC address.
Control details
[USER]
LIGHT OUTPUT
INPUT SELECT
LENS POSITION
LENS H SHIFT
[1]
SHUTTER
INPUT SELECT
LENS FUNCTION SELECT
LENS CONTROL
ENGLISH - 233