[Startup Logo]; [Uniformity] - Panasonic PT-RCQ10 Operating Instructions Manual

[BLUE]
[BLACK]
[DEFAULT LOGO]
[USER LOGO]
Note
f To create and register the [USER LOGO] image, use "Logo Transfer Software".
The software can be downloaded from the Panasonic website (https://panasonic.net/cns/projector/).

[STARTUP LOGO]

Set the logo display when the power is turned on.
1) Press as to select [STARTUP LOGO].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT LOGO]
[USER LOGO]
[NONE]
Note
f When [USER LOGO] is selected, the display of the startup logo will be kept for approximately 15 seconds.
f To create and register the [USER LOGO] image, use "Logo Transfer Software".
The software can be downloaded from the Panasonic website (https://panasonic.net/cns/projector/).
f When the [PROJECTOR SETUP] menu → [QUICK STARTUP] is set to [ON], the startup logo is not displayed when the projection is started
before the specified time has elapsed after going into the standby mode.
The specified time is the time set in the [PROJECTOR SETUP] menu → [QUICK STARTUP] → [VALID PERIOD].

[UNIFORMITY]

Correct the brightness and color unevenness of the entire screen.
Setting each color
1) Press as to select [UNIFORMITY].
2) Press the <ENTER> button.
f The [UNIFORMITY] screen is displayed.
3) Press as to select [WHITE], [RED], [GREEN], or [BLUE].
4) Press qw to adjust the level.
Item
[VERTICAL]
[HORIZONTAL]
136 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays the entire projection area in blue.
Displays the entire projection area in black.
Displays the Panasonic logo.
Displays the image registered by the user.
Displays the Panasonic logo.
Displays the image registered by the user.
Disables the startup logo display.
Operation
Press w.
Press q.
Press w.
Press q.
Adjustment
The lower-side color becomes
pale, or the upper-side color
becomes dark.
The upper-side color becomes
pale, or the lower-side color
becomes dark.
The left-side color becomes pale,
or the right-side color becomes
dark.
The right-side color becomes
pale, or the left-side color
becomes dark.
Range of adjustment
-127 - +127