Panasonic PT-RCQ10 Operating Instructions Manual page 104

[LENS THROW RATIO]
Set the throw ratio.
Select the value close to the actual projection distance divided by projected image width here.
[VERTICAL KEYSTONE]
[VERTICAL BALANCE]
Adjust the setting according to the lens shift range in the vertical
direction.
[FREE GRID]
Finer adjustment is possible by selecting the points or lines to be corrected.
For details of operation, refer to "Adjusting distortion with [FREE GRID]" (x page 105).
[LENS THROW RATIO]
Set the throw ratio.
Select the value close to the actual projection distance divided by projected image width here.
[VERTICAL KEYSTONE]
[VERTICAL ARC]
[VERTICAL BALANCE]
[MAINTAIN ASPECT RATIO]
Select [ON] to correct while keeping the aspect ratio.
[FREE GRID]
Finer adjustment is possible by selecting the points or lines to be corrected.
For details of operation, refer to "Adjusting distortion with [FREE GRID]" (x page 105).
Setting [CORNER CORRECTION]
1) Press as to select [GEOMETRY].
2) Press qw to select [CORNER CORRECTION].
104 - ENGLISH
Chapter 4 Settings — [POSITION] menu
[KEYSTONE]
[CURVED CORRECTION]
[HORIZONTAL KEYSTONE]
[HORIZONTAL BALANCE]
Adjust the setting according to the lens shift range in the horizontal
direction.
[HORIZONTAL KEYSTONE]
[HORIZONTAL ARC]
[HORIZONTAL BALANCE]